SF-1 Steel Backed Sintered Bronze PTFE Composite Self Lubricating Wrapped Sleeve Bushing Applicable To The Construction Machinery Industry
Product Details
| Maximum Static Load: | 250 N/mm² | Maximum Dynamic Load: | 140 N/mm² |
|---|---|---|---|
| Recommended Oscillating Load: | ≤ 60 N/mm² (ideal For Engineering Machinery Hinge Points) | Max Sliding Speed (Dry Friction): | 2.5 M/s |
| Max Sliding Speed (Grease Lubrication): | 5.0 M/s | Limit PV Value (Dry Continuous Operation): | ≤ 1.8 N/mm²·m/s |
| Limit PV Value (Intermittent Dry Operation): | 3.6 N/mm²·m/s | Limit PV Value (Oil/Grease Lubrication): | 50 N/mm²·m/s |
| Friction Coefficient (Dry): | 0.08 ~ 0.20 | Friction Coefficient (Lubricated): | 0.02 ~ 0.07 |
| Working Temperature Range: | -195℃ ~ +280℃ | Thermal Conductivity: | 42 W/m·K |
| Linear Expansion Coefficient: | 11×10⁻⁶ /K | Matched Shaft Roughness: | Ra 0.4 ~ 1.25μm |
| Highlight |
sintered self lubricating bearings,sintered self lubricating composite bearings,bronze self lubricating bearings |
||
Product Description
1. Product Structure
SF-1 (DU) bushing is a three-layer composite self-lubricating bearing, widely applied in mechanical oscillating and sliding friction positions.
Backing Layer: Low-carbon steel base, providing high mechanical strength and rigidity
Intermediate Layer: Sintered spherical bronze powder layer (0.20~0.35mm), excellent thermal conductivity and bonding performance
Surface Lubricating Layer: PTFE + lead composite coating (0.01~0.03mm), forms a permanent solid lubricating film during operation
Outer Surface Treatment: Copper/tin plating for rust and corrosion resistance
2. Material & Performance Features
Self-Lubricating & Maintenance-Free: The PTFE surface layer transfers to the shaft surface to form a stable lubricating film, adapting to oil-free or minimal grease working conditions, effectively preventing shaft seizure and abrasion.
Low Friction & No Crawling: Similar static and dynamic friction coefficient, excellent performance for low-speed oscillating motion, no stuck or crawling phenomenon.
High Strength & Stable Dimension: Steel back ensures high load-bearing capacity; low water absorption guarantees stable dimensional accuracy in complex environments.
Corrosion Resistant: Anti-rust plating and chemical-resistant surface layer adapt to outdoor and harsh working environments.
3. Application Scenarios
Widely used in engineering machinery hinge points, cylinder ear bushes, swing arm bearings, automotive parts, hydraulic equipment, and general mechanical sliding parts. Perfect replacement for hardened steel bushings (e.g., CASE 135248A1) for swing cylinder hinge positions.
4. Advantage Comparison vs. Original Hardened Steel Bushing
Original steel bushing: Requires continuous grease lubrication, easy to scratch the shaft once lack of oil
SF-1 DU bushing: Supports dry operation, protects the pin shaft effectively, reduces daily maintenance frequency
Product Highlights
1. Product StructureSF-1 (DU) bushing is a three-layer composite self-lubricating bearing, widely applied in mechanical oscillating and sliding friction positions.Backing Layer: Low-carbon steel base, providing high mechanical strength and rigidityIntermediate Layer: Sintered spherical bronze powder ...
High Load Self Lubricating Bronze Bearing Graphite Plugged Brass Sleeve Anti-Friction Copper Bush for Construction Machinery
Graphite Embedded Bronze Bushing, Self Lubricating Brass Bearing Sleeve, Oil-Free Copper Bush for Mold, Construction Machinery & Hydraulic Cylinder Short Description (Top Bullet Points) ✅ Self-lubricating graphite inlay design, no continuous oil supply required ✅ High strength brass alloy substrate, ...
Round Flange Graphite Bronze Bushing Self Lubricating Oil Free Bearing, High Strength Brass Sliding Bush for Automation Machinery Mold
Product Overview Round flange graphite bronze bushing (MPTZ / OFR01 series) is a self-lubricating sliding bearing made of high-strength brass alloy, with solid graphite plugs embedded on the bearing surface. The flange design with mounting holes enables fast installation and accurate positioning. ...
Self Lubricating Flanged Bronze Bushing JDB, Graphite Inlaid Flange Copper Bearing, Wear Resistant Oil Free Sleeve for Automation Equipment
Product Overview Our JDB flanged graphite plugged bronze bushing (also known as flange self-lubricating copper sleeve) is manufactured from high-strength high-lead bronze / high strength brass alloy, with solid graphite plugs embedded evenly on the sliding surface. It works without oil refueling, ...
High Load Flanged Self-Lubricating Copper Bushing, JFB Flange Graphite Embedded Bronze Bushing, Oil Free Sliding Bearing for Construction Machinery
Product Overview This flanged graphite bronze bushing (JFB / MPFZ series) is a solid self-lubricating sliding bearing made of high-strength brass alloy with embedded solid graphite lubricant dots. The flange shoulder provides axial positioning, simplifies installation and prevents axial displacement...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
